From: New York
Registration: May 2010
| posted May 16, 2010 03:18 AM||profile edit reply w/quote IP|
I tried running RightMark 6.2.3 on my home computer, just to test the results with my motherboard's RealTek Audio device. I've updated to the most recent drivers. But I can't run the test. When I start the Record/Playback test, I get a right light and the message "PROBLEM: The input level is low. Try to increase recording or playback levels in your mixer." But all of the levels in the driver mixer are already turned all the way up. The numbers in the "Adjusting Levels" window say -90.3 for both the left and right channels. If I try to run the test anyway, it gets part of the way through and then stops, telling me it can't finish because the level is too low for it to detect the signal. I have problems running no other audio software on this machine. Is there anything I can do about this to get the test to run?